top of page

Duratec S70



Duratec S70 deposits an impact resistant chromium carbide alloy with good abrasion resistance under wet conditions.

Weld Metal Hardness

50 - 60 Rockwell C



Designed for use mainly in the roughening of sugarmill can crushing rollers but is also suitable for general hard surfacing such as front end loader and excavator bucket lips and teeth.

Typical Chemical Analysis of the Weld Metal
















Current Parameters









Electrodes are packed in 5kg boxes which are then packed into 25kg shipper cartons.


Re-Drying Procedure

Place electrodes in an oven at 350-370°C for 1-3 hours or 250-280°C for 2-3 hours.


bottom of page